Stainless Steel Deck Plate by Sea Dog > 3" or 4" Sizes > Model No. 335653 or 335654 > 316 S.S.
- A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these stainless steel deck plates are built to last.
Heavy duty, all metal deck plates.
Made from Investment Cast 316 Stainless Steel, for maximum corrosion resistance and durability.
Designed to survive any environment, the “O” ring seal helps insure water stays out.
Deck plates are pre-drilled for easy installation.
Requires four #12 fasteners, sold separately.
Use with Sea Dog Deck Plate Keys # SD-335680 or SD-335699.
Deck Plate Key(s) ( Not Included - Sold Separately )
Specifications & Pricing:
Plate Option: 3" Size - Model # SD-335653 - Removable Cap Diameter (A): 3 1/4" - Flange Outside Diameter (B): 4 11/16" - Outside Diameter of Ring Below Flange (C): 3 5/16" - Distance Between Mounting Hole Centers (D): 4" - Material: 316 S.S. - Weight: 1 lb 1 oz - Price: $47.96 each
Plate Option: 4" Size - Model # SD-335654 - Removable Cap Diameter (A): 4 3/16" - Flange Outside Diameter (B): 5 9/16" - Outside Diameter of Ring Below Flange (C): 4 1/4" - Distance Between Mounting Hole Centers (D): 4 13/16" - Material: 316 S.S. - Weight: 1 lb 8 oz - Price: $58.79 each
Combine this purchase with other items in our store for discounted or even FREE Shipping.
Available in several sizes.
Most marine hardware can be divided into two distinct groups these days.
Cheap junk made with little, if any, thought to the impact its production has on the environment or the workers involved - or high quality gear made from materials designed to last, by companies that care.
We prefer to carry the latter.
Plastic and nylon parts are durable for a while and they satisfy price sensitive shoppers. Their production, however, creates numerous toxins, and eventually enough sunshine or stress will cause them to break.
Chrome, nickel, and zinc plating can protect metal surfaces for years, but their initial production, especially in third-world countries can cause devastating harm.
Painted parts are effective for a while, but paint production is usually nasty, and as it chips and goes over the side, paint carries its own poisons along.
At greenboatstuff.com we choose to carry aluminum, brass, bronze, stainless steel, and occasionally wood hardware.
In an imperfect world we know these choices are not entirely without their faults.
In our opinion, however, they satisfy our criteria for high quality, long lasting products that do the job well while inflicting minimal, if any, harm.
Product ReviewsOverall item rating: Total ratings of this item: 0Hide ratingsclick to rate this product No ratings
If entrepreneurs are noted for taking the road less traveled, then the founder of Sea-Dog, Hans "Action" Broson Sneve, was a shining example.
As a representative for a number of marine hardware lines in the early 1930s, he came up with the idea of showcasing his wares on the type of vehicle they were intended for, a sea vessel.
His sales route became the waters of the Pacific Coast.
The M.V Sea-Dog, also known as the "Boat-Show-Boat", was one of two identical 55 foot cruisers built by Stephens Bros. of Stockton, California. One was built for H.A.B. Sneve Company and the other reported for Charlie Chaplin.
Well built of oak frames, Port Orford cedar planking and all teak superstructure, she was equipped with all types of gear from manufacturers represented by the company.
Hans Sneve commenced a coastwise trip from Alaska to Mexico visiting all ports large and small en route and having an open house for the public in all ports.
The new and well appointed yacht created quite an impression in the early thirties considering this was the depth of the depression. In some of the Alaskan ports, it wasn't uncommon for practically the entire population of a town to turn out to view the Sea-Dog.
In 1960, Mr. Sneve retired from the H.A.B. Sneve Company and his nephew, Eldon Nysether took over at the helm. The company name became Sneve-Nysether, Inc. with the Sea-Dog Line continuing as the main division of the company.
Eldon taught the business to his two sons, Mark and Brad, and while growing up, they worked right alongside their father. After college, both Mark and Brad returned to the family business.
Now operating out of Everett, Washington under the Sea-Dog Corporation, the company continues to expand with a continuing addition of top quality items.
With the ongoing support from a growing number of valued customers, and the third generation of management now active, the Sea-Dog Line is looking forward to a great future.
Product Reviews for Sea Dog Stainless Steel Deck Plate ( 3" or 4" Sizes )