Stainless Steel Captive Pin Long D Shackle by Sea Dog > 5/32", 3/16", 1/4", 5/16", or 3/8" Sizes > 316 S.S.
- A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these captive pin long D shackles are built to last.
Model #'s 147173, 147174, 147176, 147178, or 147180.
Long D-Shackles work well in a number of applications.
Made from marine grade Forged 316 Stainless Steel, for maximum corrosion resistance and superior durability.
Forging eliminates casting defects and increases strength.
Captive pin design ensures pin cannot be inadvertently lost or dropped overboard.
Recessed thread design on captive side allows for pin to be pulled completely flush in jaw opening without the need for additional unscrewing.
Pin can be removed, when desired, by completely unscrewing it, as in conventional designs.
Specifications & Pricing:
Product Type: Sea Dog Stainless Steel Captive Pin Long D Shackle - Size: 5/32" - Model # SD-147173 - Mouth Width (B): 5/16" (7.9mm) - Pin Diameter (A): 5/32" (4mm) - Interior Length (C): 1 5/16 (33.3mm) Material: 316 S.S. - Breaking Load: 1,540 lbs. (698 Kg) Price: $4.47 each
Product Type: Sea Dog Stainless Steel Captive Pin Long D Shackle - Size: 3/16" - Model # SD-147174 - Mouth Width (B): 7/16" (11.1mm) - Pin Diameter (A): 3/16" (4.8mm) - Interior Length (C): 1 9/16 (39.7mm) Material: 316 S.S. - Breaking Load: 2,200 lbs. (998 Kg) Price: $5.13 each
Product Type: Sea Dog Stainless Steel Captive Pin Long D Shackle - Size: 1/4" - Model # SD-147176 - Mouth Width (B): 1/2" (12.7mm) - Pin Diameter (A): 1/4" (6.4mm) - Interior Length (C): 1 7/8 (47.6mm) Material: 316 S.S. - Breaking Load: 3,300 lbs. (1,496 Kg) Price: $6.52 each
Product Type: Sea Dog Stainless Steel Captive Pin Long D Shackle - Size: 5/16" - Model # SD-147178 - Mouth Width (B): 11/16" (17.5mm) - Pin Diameter (A): 5/16" (7.9mm) - Interior Length (C): 2 3/8 (60.3mm) Material: 316 S.S. - Breaking Load: 3,300 lbs. (1,496 Kg) Price: $11.24 each
Product Type: Sea Dog Stainless Steel Captive Pin Long D Shackle - Size: 3/8" - Model # SD-147180 - Mouth Width (B): 15/16" (23.8mm) - Pin Diameter (A): 3/8" (9.5mm) - Interior Length (C): 3 (76.2mm) Material: 316 S.S. - Breaking Load: 9,900 lbs. (4,490 Kg) Price: $11.64 each
Combine this purchase with other items in our store for discounted shipping.
Available in several sizes.
Most marine hardware can be divided into two distinct groups these days.
Cheap junk made with little, if any, thought to the impact its production has on the environment or the workers involved - or high quality gear made from materials designed to last, by companies that care.
We prefer to carry the latter.
Plastic and nylon parts are durable for a while and they satisfy price sensitive shoppers. Their production, however, creates numerous toxins, and eventually enough sunshine or stress will cause them to break.
Chrome, nickel, and zinc plating can protect metal surfaces for years, but their initial production, especially in third-world countries can cause devastating harm.
Painted parts are effective for a while, but paint production is usually nasty, and as it chips and goes over the side, paint carries its own poisons along.
At greenboatstuff.com we choose to carry aluminum, brass, bronze, stainless steel, and occasionally wood hardware.
In an imperfect world we know these choices are not entirely without their faults.
In our opinion, however, they satisfy our criteria for high quality, long lasting products that do the job well while inflicting minimal, if any, harm.
If entrepreneurs are noted for taking the road less traveled, then the founder of Sea-Dog, Hans "Action" Broson Sneve, was a shining example.
As a representative for a number of marine hardware lines in the early 1930s, he came up with the idea of showcasing his wares on the type of vehicle they were intended for, a sea vessel.
His sales route became the waters of the Pacific Coast.
The M.V Sea-Dog, also known as the "Boat-Show-Boat", was one of two identical 55 foot cruisers built by Stephens Bros. of Stockton, California. One was built for H.A.B. Sneve Company and the other reported for Charlie Chaplin.
Well built of oak frames, Port Orford cedar planking and all teak superstructure, she was equipped with all types of gear from manufacturers represented by the company.
Hans Sneve commenced a coastwise trip from Alaska to Mexico visiting all ports large and small en route and having an open house for the public in all ports.
The new and well appointed yacht created quite an impression in the early thirties considering this was the depth of the depression. In some of the Alaskan ports, it wasn't uncommon for practically the entire population of a town to turn out to view the Sea-Dog.
In 1960, Mr. Sneve retired from the H.A.B. Sneve Company and his nephew, Eldon Nysether took over at the helm. The company name became Sneve-Nysether, Inc. with the Sea-Dog Line continuing as the main division of the company.
Eldon taught the business to his two sons, Mark and Brad, and while growing up, they worked right alongside their father. After college, both Mark and Brad returned to the family business.
Now operating out of Everett, Washington under the Sea-Dog Corporation, the company continues to expand with a continuing addition of top quality items.
With the ongoing support from a growing number of valued customers, and the third generation of management now active, the Sea-Dog Line is looking forward to a great future.
Product Reviews for Sea Dog Stainless Steel Captive Pin Long D Shackle ( 5/32" to 3/8" Sizes )