Oil Gone Easy Marine S-200 is a unique new product that helps you keep your local waters clean, avoid costly fines, and keeps your bilge from accumulating nasty petrochemicals.

Cleaning your bilge is usually one of the dirtiest jobs onboard any vessel, especially when engine oil, fuel, or lubricants gets in the mix.

While it might be tempting to just pump your bilge water over the side, think again.

In addition to causing catastrophic damage to the marine ecosystem, dumping contaminated bilge waste is illegal under the Federal Water Pollution Control Act.

Fines for violating this Act routinely run in the thousands of dollars.

Oil Gone Easy Marine S-200 works by encouraging bioremediation - a process where naturally occurring microbes consume petroleum products and break them down into harmless compounds.

With one simple application, the affected area is charged with a nutrient solution that stimulates the rapid multiplication of natural, oil eating microorganisms.

Unlike other bioremediation products that work by introducing microbes, Oil Gone Easy simply rings the dinner bell for these little creatures that are all around us.

In the bilge, the product will not disperse in the water column. Instead, it will attach to the hydrocarbons and create an agglomerated gel which will remain on the surface where there is an aerobic environment. Thus, only clean water at the bottom of the water column will be pumped overboard

Also works great around fuel docks or any area where immediate spill treatment is required.

Product Features:

Cleans spilled fuels, oils, and lubricants.

Can be applied to hard surfaces or directly to contaminated water.

One application keeps on cleaning for up to two months.

One 32 oz. bottle will easily treat vessels up to 28 feet, larger craft may require more than one bottle.

Easy to apply.

Easy to store.

Cost effective.

Removes sheen in hours.

No mixing of compounds required, just pour on affected area and forget it.

Will not harm rubber, metal, wood or fiberglass.

Non-toxic.

Non-irritant.

Non-flammable.

100% biodegradable.

One application cleans the spill on land or water.

Adheres to the hydrocarbon – rain will not wash it away.

Will not wash away in tidal areas.

Thoroughly tested.

Contains no bacteria.

Available in a single size pour top container.

Industrial size containers available by special order, please contact us for pricing.

Specifications:

Product Type: Oil Gone Easy Marine S-200 - Model # OGE-M-S-200 - Size: 32 oz (946 ml) - Price: $24.95



Made in the USA.

Combine this purchase with other items in our store for discounted shipping.

Order Size - Shipping

Up to $24.95 - $5.99

$25 - $74.99 - $9.99

$75- $149.99 - $14.99

Over $150 - FREE





Technical Information:

The oleophilic (meaning having a strong affinity for oil rather than water) outer shell will adhere to the hydrocarbon and remain there despite rain, wind or tides. It creates a micro-emulsion facilitating the access of indigenous bacteria to the contaminant. The outer shell acts as a starter for hydrocarbon degraders. So the microorganisms start increasing in number. Despite regular fertilizers, Oil Gone does not serve as food for non hydrocarbon degraders, therefore, there is only growth of the microorganisms necessary to decontaminate the site. Once the outer shell is broken by the indigenous bacteria, the result is a large amount of hydrocarbon eaters, a microemulsified hydrocarbon and the exact quantity of Nitrogen and Phosphorus needed to biodegrade the contaminant. Despite the presence of Nitrogen and Phosphorous, Marine S-200 has never been known to cause algae blooms.

If you apply it on water the product will disperse in the water column. It will attach to the hydrocarbon and create a micro-emulsion which is less dense than water, therefore it will go to the surface where more oxygen is available and the conditions for biodegradation are better.

Oil Gone Easy is a bioremediation accelerator used for the remediation of hydrocarbon spills, or leaks. It is a non-intrusive, cost-effective remedy for the clean up of hydrocarbons. These hydrocarbons include but are not limited to gasoline, #2 up to #6 diesel fuel, jet fuels, kerosene, lubricating oils, hydraulic oils and crude oils.

S-200 is a white water liquid and as such can be sprayed with traditional liquid spraying equipment, such as: pressurized sprayers or backpack sprayers. The recommended application rate is approximately 1 to 1 by weight of the Oil Gone Easy S-200 as compared to the hydrocarbon being remediated. In other words, use 1 pound of Oil Gone Easy S-200 for every 1 pound of hydrocarbon you are remediating.

For applications on water, first, stop the spill and clean up as much free product as possible with skimmers, mechanical equipment, etc. Once that is resolved, apply Oil Gone Easy Marine S-200 to the surface of the hydrocarbon/water mixture.

Accreditations:

The United States Environmental Protection Agency.

The Florida Department of Environmental Protection.

The New Jersey Department of Environmental Protection.

The New York Department of Environmental Protection.

The Pennsylvania Department of Environmental Protection.

Oil Gone Easy was used to clean up the Boyne River Oil Spill in Ireland, the Prestige Oil Spill off the Spanish Coast, and the infamous Exxon Valdez Spill in Alaska.